LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Emission System) >> Evaporative Emission (EVAP) Control System Component Removal/Installation >> Fuel Tank Side

Fuel Tank Side

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the rear of the vehicle and support it with safety stands.
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
Fig 1: Removing/Installing Evaporative Emission Control System Component - Fuel Tank Side
G01026397Courtesy of MAZDA MOTORS CORP.