LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Power Steering System) >> Power Steering Pump Pulley >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the power steering pump pulley bolt.
    Fig 1: Loosening Power Steering Pump Pulley Bolt
    G01152512Courtesy of MAZDA MOTORS CORP.
  2. Remove the drive belt. Refer to ACCESSORY DRIVE BELT .
  3. Remove the bolt and the power steering pump pulley.
    Fig 2: Removing Power Steering Pump Pulley
    G01152513Courtesy of MAZDA MOTORS CORP.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals