Removal & Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the hose from the power steering fluid reservoir.

Fig 1: Disconnecting Power Steering Fluid Reservoir Hose
Courtesy of MAZDA MOTORS CORP.
Disconnect the power steering cooler hose.

Fig 2: Disconnecting Power Steering Cooler Hose
Courtesy of MAZDA MOTORS CORP.
Remove the front bumper cover. Refer to FRONT BUMPER COVER .
Remove the nuts and the power steering fluid cooler.

Fig 3: Removing Power Steering Fluid Cooler
Courtesy of MAZDA MOTORS CORP.
To install, reverse the removal procedure.
- Fill, bleed and leak check the power steering system. Refer to FILL .