Section 137 (Engine Mechanical - 3.0L): Piston: Disassembly

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Remove the top compression ring.

Fig 1: Removing Top Compression Ring
Courtesy of MAZDA MOTORS CORP.
Remove the second compression ring.

Fig 2: Removing Second Compression Ring
Courtesy of MAZDA MOTORS CORP.
Remove the first oil control ring.

Fig 3: Removing First Oil Control Ring
Courtesy of MAZDA MOTORS CORP.
Remove the oil control spacer ring.

Fig 4: Removing Oil Control Spacer Ring
Courtesy of MAZDA MOTORS CORP.
Remove the second oil control ring.

Fig 5: Removing Second Oil Control Ring
Courtesy of MAZDA MOTORS CORP.
Remove the clips.

Fig 6: Removing Clips
Courtesy of MAZDA MOTORS CORP.
Remove the piston pin and the connecting rod from the piston.

Fig 7: Removing Piston Pin & Connecting Rod
Courtesy of MAZDA MOTORS CORP.
Clean and inspect the connecting rod and the piston. Refer to PISTON - INSPECTION .