LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Engine Mechanical - 3.0L) >> Oil Pan Baffle >> Installation

Oil Pan Baffle: Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the oil pan baffle and install the nuts.
    1. Tighten the nuts in two stages.
    2. Stage 1: Tighten to 5 Nm (44 lb-in).
    3. Stage 2: Tighten 45 degrees.
    Fig 1: Installing Oil Pan Baffle
    G01151221Courtesy of MAZDA MOTORS CORP.
  2. Install the oil pump screen cover and tube. Refer to OIL PUMP SCREEN & PICKUP TUBE .
scientia non olet · About LEMON Manuals