LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Engine Mechanical - 3.0L) >> Exhaust Manifold - RH >> Removal

Exhaust Manifold - RH: Removal

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the exhaust gas recirculation (EGR) tube. Refer to EXHAUST MANIFOLD TO EXHAUST GAS RECIRCULATION (EGR) VALVE TUBE .
  2. Remove the generator. Refer to GENERATOR .
  3. Disconnect and remove the RH Heated Oxygen Sensor (HO2S).
  4. Remove the exhaust flexible pipe. Refer to EXHAUST FLEXIBLE PIPE .
    Fig 1: Removing Exhaust Flexible Pipe
    G01151016Courtesy of MAZDA MOTORS CORP.
  5. Remove the RH manifold.
    • Discard the gasket.
scientia non olet · About LEMON Manuals