Removal & Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Remove the EGR valve.
1. Disconnect the vacuum line.
2. Disconnect the EGR tube.
3. Remove the EGR valve and discard the gasket.
Fig 1: Removing EGR Valve
Courtesy of MAZDA MOTORS CORP.

NOTE: The EGR valve sealing surfaces are soft metals.

To install, reverse the removal procedure.
1. Carefully clean all sealing surfaces and install a new EGR valve gasket.