Removal & Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine ground wire.

Fig 1: Removing Engine Ground Wire
Courtesy of MAZDA MOTORS CORP.
Using the special tools, support the engine.

Fig 2: Supporting Engine
Courtesy of MAZDA MOTORS CORP.
Remove the A/C line bracket bolt and position the A/C lines out of the way.

Fig 3: Removing A/C Line Bracket
Courtesy of MAZDA MOTORS CORP.
Remove the engine support insulator bolt.

Fig 4: Removing Engine Support Insulator Bolt
Courtesy of MAZDA MOTORS CORP.
Remove the engine support tool.
1. Remove the nut.
2. Remove the bolts and insulator.
Fig 5: Removing Engine Support
Courtesy of MAZDA MOTORS CORP.
To install, reverse the removal procedure.