LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Power Rack & Pinion) >> Engine Speed Sensing Power Steering >> Steering Gear And Linkage Assembly >> Seal Ring Assembly Note

Seal Ring Assembly Note

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the seal rings to the pinion shaft component.
  2. Pull the SST  over the pinion shaft component from both directions. This will correctly shape the seal ring.
  3. Install the oil seal from the pinion shaft gear side.
Fig 1: Installing Seal Rings/Oil Seal
G01197925Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals