LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Power Rack & Pinion) >> Engine Speed Sensing Power Steering >> Steering Gear And Linkage Assembly >> Locknut (Housing Cover) Assembly Note

Locknut (Housing Cover) Assembly Note

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Temporarily attach the tie rod to the steering rack.
  2. Tighten the locknut.

    Tightening Torque 

    20-29 N.m (2.1-2.9 kgf.m, 15-21 ft.lbf) 

    Fig 1: Installing Locknut (Housing Cover)
    G01197929Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals