Removal and Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles with manual windows

Fig 1: Removing/Installing Rear Door Manual Window Regulator Handle

Courtesy of MAZDA MOTORS CORP.

Remove the rear door manual window regulator handle.
1. Release the clip.
2. Remove the rear door manual window regulator handle.
  All vehicles
  
  Fig 2: Removing/Installing Rear Door Latch Release Handle Bezel
  Courtesy of MAZDA MOTORS CORP.
Remove the rear door latch release handle bezel.
1. Remove the screw.
2. Remove the rear door latch release handle bezel.
  
  Fig 3: Removing/Installing Door Handle Cup Screw
  Courtesy of MAZDA MOTORS CORP.
Remove the door handle cup screw.

Fig 4: Removing/Installing Rear Door Sail Panel
Courtesy of MAZDA MOTORS CORP.
Remove the rear door sail panel.

Fig 5: Removing/Installing Rear Door Trim Panel
Courtesy of MAZDA MOTORS CORP.
Remove the rear door trim panel.
- Disconnect the electrical connector (vehicles with power windows only).
To install, reverse the removal procedure.