LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Exterior/Interior Trim) >> Trim >> Sliding Door Garnish Removal/Installation

Sliding Door Garnish Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the sliding door garnish toward you, then disengage clips A from the body, and remove the sliding door garnish.
  2. Install in the reverse order of removal.
Fig 1: Removing Sliding Door Garnish
G01196567Courtesy of MAZDA MOTORS CORP.