Power Sliding Door (PSD) Rear Switch Inspection

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Remove the PSD rear switch.
Inspect for continuity between the PSD rear switch terminals using an ohmmeter.
- If not as specified, replace the PSD rear switch.

Fig 1: Inspecting Power Sliding Door (PSD) Rear Switch Continuity

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Power Sliding Door (PSD) Rear Switch Connector

Courtesy of MAZDA MOTORS CORP.