Removal & Installation
WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.
- Remove appropriate front seat. See FRONT SEAT . Disconnect seat belt buckle switch electrical connector. Remove seat belt buckle mounting bolt and seat belt buckle switch assembly.
- To install, reverse removal procedure. Tighten front seat belt buckle mounting bolt to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.