LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Front Suspension) >> Wheel Bearing >> Installation >> Vehicles with ABS

Vehicles with ABS

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the anti-lock brake sensor and tighten the bolt. See Figure .
  2. Install the tie rod end into the wheel knuckle. See Figure . Install the tie rod end nut. Install a new cotter pin.
  3. Install the wheel hub nut. See Figure .
  4. Install the brake disc. See REMOVAL & INSTALLATION FRONT BRAKE ROTOR for FRONT DISC BRAKE.
scientia non olet · About LEMON Manuals