Steering Gear And Linkage Installation Note
WARNING: This page is about a different car, the 2004 Mazda MPV, 2003 Mazda MPV, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Loosely tighten nuts 3, 4 and bolt 2.
- Tighten the mounting bracket nuts and bolts to the specified torque in the order shown.
- Tighten the crossmember nuts. Tightening torque 68.67-96.84 ft. lbs. (93.1-131.3 N.m).
Courtesy of MAZDA MOTORS CORP.