LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Engine Mechanical - Overhaul - (AJ W/O VVT)) >> Cylinder Block Assembly (II) >> Oil Strainer Assembly Note

Oil Strainer Assembly Note

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten the bolts.
  2. Tighten the nut in two steps.
    1. Tighten to 15.0 N.m {153 kgf.cm, 133 in.lbf}  .
    2. Tighten 45 °  using the SST  .
      Fig 1: Tightening Oil Strainer Nut
      G02831175Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals