LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Fwd Axle Shafts) >> Removal & Installation >> Axle Shaft (3.0L) >> Removal >> Lock Nut Removal Note

Lock Nut Removal Note

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Knock the crimped portion of the lock nut outward by using a small chisel and a hammer. See Figure .
  2. Lock the hub by applying the brakes.
  3. Remove the lock nut.
scientia non olet · About LEMON Manuals