LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Fwd Axle Shafts) >> Overhaul >> Intermediate Shaft (3.0L) >> Reassembly >> Dust Seal (Axle Shaft Side) Assembly Note

Dust Seal (Axle Shaft Side) Assembly Note

WARNING: This page is about a different car, the 2004 Mazda 6 and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease to the new dust seal lip.
  2. Install the new axle shaft side dust seal using the Oil Seal Installer (49-U027-003), the Bearing Installer (49-W027-003) and a press. See Fig 1 .
Fig 1: Assembling Axle Shaft Dust Seal
G00318699Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals