LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - System & Component Testing) >> Emission Systems & Sub-Systems >> Fuel Evaporation (EVAP) System - Except MPV >> Catch Tank - Miata, MPV & Protege

Catch Tank - Miata, MPV & Protege

WARNING: This page is about a different car, the 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, 2001 Mazda MPV, and 2001 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Remove catch tank. See CATCH TANK LOCATIONS  table. Plug one port and apply small amount of air pressure into other port on catch tank. Check for leaks. Replace if any leaks are present.

CATCH TANK LOCATIONS

Application Location
Miata Right Side Strut Area Of Engine Compartment
MPV Left Front Of Engine Compartment
Protege Right Rear Corner Of Engine Compartment
626 Left Rear Of Engine Compartment