LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul - (L5) >> Timing Chain Assembly >> Timing Chain Assembly Note

Timing Chain Assembly Note

  1. Install the SST  to the camshaft, then align the No. 1 camshaft position with the TDC.
  2. Remove the cylinder block lower blind plug.
    Fig 1: Installing SST To Camshaft
    G08575823
  3. Install the SST  as shown in the figure.
  4. Turn the crankshaft clockwise so that the crankshaft is in the No.1 cylinder TDC position.
  5. Install the timing chain.
    Fig 2: Identifying SST (303-507)
    G08575824
  6. Install the chain tensioner and remove the retaining wire.
    Fig 3: Identifying Chain Tensioner And Retaining Wire
    G08575825
scientia non olet · About LEMON Manuals