LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul - (L5) >> Timing Chain Assembly >> Cylinder Head Cover Assembly Note

Cylinder Head Cover Assembly Note

CAUTION:
  • Install the cylinder head cover within 10 min of applying the silicone sealant.
  1. Apply silicone sealant to the mating faces as shown in the figure.

    Thickness 

    4.0-6.0 mm {0.16-0.23 in} 

  2. Install the cylinder head cover with a new gasket.
    Fig 1: Applying Silicone Sealant To Mating Faces Of Cylinder Head Cover
    G08575835
  3. Tighten the bolts in the order shown in the figure.

    Tightening torque 

    8.0 -9.5 N.m {82-96 kgf.cm, 71-84 in.lbf} 

    Fig 2: Identifying Cylinder Head Cover Bolt Tightening Order
    G08575836
scientia non olet · About LEMON Manuals