LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul - (L5) >> Cylinder Block Assembly (II) >> Oil pan Assembly Note

Oil pan Assembly Note

  1. Apply a continuous bead of silicone sealant to the oil pan as indicated in the figure.
    Fig 1: Applying Continuous Bead Of Silicone Sealant To Oil Pan
    G08575810
  2. Use a square ruler to unite the oil pan and the cylinder block junction side on the engine front cover side.
    Fig 2: Assemblying Oil Pan And Cylinder Block Junction Side On Engine Front Cover Side Using Square Ruler
    G08575811
  3. Tighten the rear oil pan bolts in the order as shown in the figure.

    Tightening torque 

    17-23 N.m {1.8-2.3 kgf.m, 13-16 ft.lbf} 

    Fig 3: Identifying Rear Oil Pan Bolt Tightening Order
    G08575812
scientia non olet · About LEMON Manuals