LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul - (L5) >> Cylinder Block Assembly (II) >> Drive Plate (ATX), Flywheel (MTX) Assembly Note

Drive Plate (ATX), Flywheel (MTX) Assembly Note

  1. Hold the crankshaft using the SST  .
  2. Tighten the bolts in the 3 steps in the figure.

    Tightening torque 

    1. 46-54 N.m {4.7-5.5 kgf.m, 34-39 ft.lbf} 
    2. 76-84 N.m {7.8-8.5 kgf.m, 57-61 ft.lbf} 
    3. 108-116 N.m {11.1-11.8 kgf.m, 80-85 ft.lbf} 
      Fig 1: Identifying Flywheel Bolts Tightening Sequence
      G08575809
scientia non olet · About LEMON Manuals