LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul - (L5) >> Cylinder Block Assembly (I) >> Piston Ring Assembly Note

Piston Ring Assembly Note

  1. Install the two oil control ring segments and spacer.
  2. Verify that the second ring is installed with scraper face side downward.
  3. Verify that the top ring is installed with chamfered face side inner of upper.
    Fig 1: Identifying Piston Ring Assembly
    G08575792
  4. Position the end gap of each ring as indicated in the figure.
    Fig 2: Identifying Piston Rings End Gap Position
    G08575793
scientia non olet · About LEMON Manuals