LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul - (L5) >> Cylinder Block Assembly (I) >> Main Bearing Cap Assembly Note

Main Bearing Cap Assembly Note

  1. Install the main bearing caps in the order indicated in the figure, using the SST (49 D032 316)  .

    Tightening torque 

    1. 8-12 N.m {82-122 kgf.cm, 71-106 in.lbf} 
    2. 28-32 N.m {2.9-3.2 kgf.m, 21-23 ft.lbf} 
    3. 87.5-92.5° 
      Fig 1: Identifying Main Bearing Caps Installing Order
      G08575791
scientia non olet · About LEMON Manuals