Bolt Inspection
- Measure the length of each bolt.
- If it exceeds the specification, replace the bolt.
Cylinder head bolt length
Standard: 145.2-145.8 mm {5.717-5.740 in}
Maximum: 146.5 mm {5.768 in}
Connecting rod bolt length
Standard: 43.7-44.3 mm {1.73-1.74 in}
Maximum: 45.0 mm {1.77 in}
Main bearing cap bolt length
Standard: 104.0-104.6 mm {4.095-4.118 in}