LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System [MZR 2.5] >> Engine Exhaust System Removal/Installation >> Main Silencer Installation Note

Main Silencer Installation Note

  1. Spray the flare with a carbon remover (equivalent to TB6601). (Only in the case of reusing the main silencer)
    Fig 1: Flared Section
    G08150212
  2. Remove the carbon adhering to the flared section shown in the figure using a nylon brush or sandpaper (No.400 or equivalent). (Only in the case of reusing the main silencer)
scientia non olet · About LEMON Manuals