LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Electrical >> Gauges >> On-Board Diagnostic [Instrument Cluster] >> PID/Data Monitor Table [Instrument Cluster]

PID/Data Monitor Table [Instrument Cluster]

-: Not applicable

PID name Description Unit/Status
ECT_GAUGE Indicates the engine coolant temperature. °C, °F
FUEL_INPT_1 Indicates the resistance value of fuel gauge sender unit. ohm
NUMKEYS Indicates the number of key ID registered in the instrument cluster. -
ODO_CNT Indicates the odometer rolling count. km, ft, mi
SPDMTR Indicates the vehicle speed. KPH, MPH
TACHOMTR Indicates the tachometer data. RPM
TOTAL_DIST Indicates the total distance. km, ft, mi
VPWR Indicates the instrument cluster power supply voltage. V
VSS(1) Indicates the VSS data. KPH
WU1_ERR_P(1) Tire pressure
  • Signal is normal: Normal
  • Signal is abnormal: Error
Normal/Error
WU2_ERR_P(1)
WU3_ERR_P(1)
WU4_ERR_P(1)
WU1_ERR_T(1) Tire temperature
  • Signal is normal: Normal
  • Signal is abnormal: Error
Normal/Error
WU2_ERR_T(1)
WU3_ERR_T(1)
WU4_ERR_T(1)
WU1_ID(1) Indicates the registered ID that is transmitted from the wheel unit. -
WU2_ID(1)
WU3_ID(1)
WU4_ID(1)
WU1_P(1) Indicates the tire pressure. KPa, MPa
WU2_P(1)
WU3_P(1)
WU4_P(1)
WU1_T(1) Indicates the internal tire air temperature. °C, °F
WU2_T(1)
WU3_T(1)
WU4_T(1)
WU1_VPWR(1) Supply voltage
  • Signal is normal: Normal
  • Signal is abnormal: Error
Normal/Error
WU2_VPWR(1)
WU3_VPWR(1)
WU4_VPWR(1)
(1) Vehicles with tire pressure monitoring system