LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Rear Axle >> Rear Wheel Hub Bolt Replacement

Rear Wheel Hub Bolt Replacement

  1. Remove the brake caliper component and disc plate.
  2. Remove the wheel hub bolt using the SST  as shown in the figure.
    Fig 1: Wheel Hub Bolt Removal Tool
    G08150498
  3. Place a new wheel hub bolt in the wheel hub.
  4. Install the wheel hub by placing a proper sized washer on the hub, and tightening the nut as shown in the figure.
    Fig 2: Installing Wheel Hub Bolt
    G08150499
scientia non olet · About LEMON Manuals