LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle >> Wheel Hub, Steering Knuckle Disassembly/Assembly >> Wheel Hub Component Removal Note >> Without using SST

Without using SST

  1. Grind a section of the bearing inner race until approx. 0.5 mm {0.02 in}  remains.
    Fig 1: Removing Bearing Inner Race (Without Using SST)
    G08150483
  2. Remove the bearing inner race using a chisel.
scientia non olet · About LEMON Manuals