LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostic [Abs/Dynamic Stability Control System) >> On-Board Diagnosis [Abs With Dynamic Stability Control (DSC)] >> Reading DTCs Procedure >> CMDTC self test

CMDTC self test

  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "All CMDTCs".
  3. Verify the DTC according to the directions on the screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
  4. After completion of repairs, clear all DTCs stored in the DSC. (See CLEARING DTCS PROCEDURE .)
scientia non olet · About LEMON Manuals