| DETECTION CONDITION |
- C0061:54
- DSC HU/CM detects that the initialization procedure has not been performed. (low-G sensor)
- C0063:54
- DSC HU/CM detects that the initialization procedure has not been performed. (yaw rate sensor)
|
| FAIL-SAFE FUNCTION |
- Illuminates the TCS/DSC indicator light.
- Inhibits the TCS (engine control) and DSC controls.
|
| POSSIBLE CAUSE |
- Initialization procedure for the low-G sensor or yaw rate sensor not performed
- SAS control module malfunction
- DSC HU/CM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |