| DETECTION CONDITION |
- C0044:01
- The voltage value from the brake fluid pressure sensor is not within specification.
- C0044:28, C0044:64
- The pressure from the brake fluid pressure sensor is not within specification.
- C0044:54
- The brake fluid pressure sensor detects the initialization procedure has not been perform.
|
| FAIL-SAFE FUNCTION |
- Illuminates the TCS/DSC indicator light.
- Inhibits the TCS, DSC and brake assist controls.
|
| POSSIBLE CAUSE |
- The initialization procedure for the brake fluid pressure sensor has not been performed.
- Brake fluid pressure sensor malfunction
- Open or short circuit in the brake fluid pressure sensor circuit in DSC HU/CM
|
| SYSTEM WIRING DIAGRAM |
- |