LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System [Conventional Brake System] >> Rear Brake (Disc) Removal/Installation >> Clip and Brake Pipe Installation Note

Clip and Brake Pipe Installation Note

  1. Install the brake hose to the vehicle-side bracket and secure it using a clip.
  2. Verify that the brake hose is not twisted.
  3. Tighten the brake pipe to the specified torque using a commercially available flare nut wrench.
scientia non olet · About LEMON Manuals