LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System [Conventional Brake System] >> Power Brake Unit Inspection >> Using SST >> Hydraulic pressure inspection

Hydraulic pressure inspection

  1. Start the engine. Depress the brake pedal when the vacuum reaches 66.7 kPa {500 mmHg, 19.7 inHg}  .
  2. At this time, apply the indicated pedal force and if the fluid pressure is within the specification, the unit is normal.
scientia non olet · About LEMON Manuals