LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System [Conventional Brake System] >> Front Brake (Disc) Removal/Installation >> Brake Hose Installation Note

Brake Hose Installation Note

  1. Install the brake hose to the caliper.
  2. Tighten the flare nut while holding the brake hose at point A with a spanner or equivalent.
    Fig 1: Identifying Brake Hose Flare Nut
    G08150631
  3. Verify that the brake hose is not twisted.
scientia non olet · About LEMON Manuals