LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System [Conventional Brake System] >> Caliper (Front) Disassembly/Assembly >> Dust Seal Assembly Note

Dust Seal Assembly Note

  1. Assemble a new dust seal to the caliper using the SSTs  and a press with a press-in force of 834 N {85 kgf, 187 in.lbf}  .
    Fig 1: Installing Dust Seal Assembly
    G08150635
  2. Verify that there is no gap between the dust seal and caliper body.
scientia non olet · About LEMON Manuals