LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System [Conventional Brake System] >> Brake Fluid Level Sensor Inspection

Brake Fluid Level Sensor Inspection

  1. Disconnect the brake fluid level sensor connector from the master cylinder. (See MASTER CYLINDER REMOVAL/INSTALLATION .)
  2. Inspect for continuity according to fluid level between the brake fluid level sensor terminals.
    Fig 1: Identifying Brake Fluid Level Sensor Connector Terminals
    G08150614
    Fig 2: Brake Fluid Level Sensor Connector Terminals Continuity Chart
    G08150615
scientia non olet · About LEMON Manuals