Washer Motor Inspection

Disconnect the negative battery cable.
Remove the front mudguard (RH). (See MUDGUARD REMOVAL/INSTALLATION .)
Disconnect the washer motor connector.
After connecting washer motor terminal A to the positive battery terminal, and terminal B to the negative battery terminal, verify that washer fluid flows to the windshield washer hose.

Fig 1: Inspecting Washer Motor
- If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION .)
After connecting washer motor terminal B to the positive battery terminal, and terminal A to the negative battery terminal, verify that washer fluid flows to the rear washer hose.
- If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION .)