| Possible cause |
- Defective CD (e.g., cracked, badly bent, rough edges, scratch, dirty CD, condensation)
- Non-conventional discs (e.g., 8 cm (3 in) CD, 8 cm (3 in) disc adapter, heart-shaped disc, octagonal disc)
- Poor connection of audio unit connector or terminal (e.g., damaged, bent, pulled-out pin, corrosion)
- Deformed disc is used (e.g., out of specification (thickness), bent disc).
- Multiple CDs are inserted into the CD player at the same time
- Audio unit malfunction
NOTE:
- The CD may be malfunctioning if the CD player/changer does not eject the certain CD only. Inspect the CD player/changer operation using the CD known to be good.
|