LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic [Hands-Free Telephone System) >> DTC INSPECTION [Bluetooth SYSTEM (HANDS-FREE TELEPHONE SYSTEM)] >> Without Using M-MDS (On-board Diagnostic Test Mode)

Without Using M-MDS (On-board Diagnostic Test Mode)

  1. Switch the ignition to ACC or ON.
  2. While pressing the POWER/VOLUME switch, simultaneously press the PRESET 1 button and the PRESET 6 button for 3 s or more  .
    Fig 1: Identifying Power/Volume Switch And Seek/Track, Preset 1 And 6 Buttons
    G08152594
    NOTE:
    • If several DTCs are in the memory, they can be displayed using the SEEK/TRACK button (up or down).
    Fig 2: Display Current And Device And Error Codes
    G08152595
  3. Switch the ignition OFF (LOCK) to stop the on-board diagnostic test mode.
scientia non olet · About LEMON Manuals