LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic [Hands-Free Telephone System) >> DTC INSPECTION [Bluetooth SYSTEM (HANDS-FREE TELEPHONE SYSTEM)] >> Using the M-MDS >> CMDTC self test

CMDTC self test

  1. Connect the M-MDS(IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "All CMDTCs".
  3. Verify the DTC according to the directions on the screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
  4. After completion of repairs, clear all DTCs stored in the Bluetooth unit. (See CLEARING DTC [BLUETOOTH SYSTEM (HANDS-FREE TELEPHONE SYSTEM)] .)