LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic [Audio] >> Diagnostic Assist Function [Audio] >> Switch Inspection

Switch Inspection

  1. Switch the ignition to ACC or ON.
  2. Turn the audio unit power to ON.
  3. While pressing the POWER/VOLUME switch, simultaneously press the PRESET 3 button for 0.5 s or more  .
    Fig 1: Identifying Power/Volume Switch And Preset 3 Button
    G08152589
  4. Inspect according to the following table:
    INSPECTION DISPLAY ACTION
    • Launch the switch inspection mode.
    • Operate all of the buttons (press).
    • Does the buzzer sound?
    		 - Yes The switch is normal.
    No Verify the switch.
    (See CONFIRMATION STEP 1: AUDIO PANEL SWITCH CONFIRMATION [ENTIRE AUDIO SYSTEM] .)
  5. Cancel the diagnostic assist function by either turning off the audio unit power or by switching the ignition OFF (LOCK).
scientia non olet · About LEMON Manuals