LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> On-Board Diagnostic [Audio] >> Clearing DTC [Audio] >> Without M-MDS (On-board Diagnostic Test Mode)

Without M-MDS (On-board Diagnostic Test Mode)

  1. Launch the on-board diagnostic test mode. (See DTC INSPECTION [AUDIO] .)
  2. While pressing the POWER/VOLUME switch, simultaneously press the AUDIO CONT switch for 3 s or more  .
    Fig 1: Identifying Power/Volume Switch And Audio CONT Switch
    G08152586
  3. Switch the ignition OFF (LOCK) to stop the on-board diagnostic test mode.
scientia non olet · About LEMON Manuals