LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> On-Board Diagnostic [Multiplex Communication System] >> DTC Table [Multiplex Communication System] >> HS-Can

DTC Table [Multiplex Communication System]: HS-Can

DTC output module
(M-MDS display)
DTC Malfunction location Self-test type (3) Reference for inspection procedure
PCM
(PCM)
U0073:00(1) Unit communication error C, O, R (See DTC U0001:88, U0073, U0073:00 [MULTIPLEX COMMUNICATION SYSTEM] .)
U0101:00 Communication error to TCM C, O, R (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .)
U0121:00 Communication error to DSC HU/CM C, O, R
U0155:00 Communication error to instrument cluster C, O, R
TCM(2)
(TCM)
U0073:00(1) Unit communication error C, D (See DTC U0001:88, U0073, U0073:00 [MULTIPLEX COMMUNICATION SYSTEM] .)
U0100:00 Communication error to PCM C, D (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .)
U0121:00 Communication error to DSC HU/CM C, D
U0401:00(1) Signal error from PCM C, D (See DTC U0401:00 [FS5A-EL] .)
U0415:00(1) Signal error from DSC HU/CM C, D (See DTC U0415:00 [FS5A-EL] .)
EHPAS control module
(EPS)
U0073(1) Unit communication error C, D (See DTC U0001:88, U0073, U0073:00 [MULTIPLEX COMMUNICATION SYSTEM] .)
U0100 Communication error to PCM C, D (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .)
U0140 Communication error to BCM C, D
U0155 Communication error to instrument cluster C, D
U2023(1) Signal error from PCM C, D (See DTC U2023 .)
DSC HU/CM
(ABS)
U0001:88(1) Unit communication error C, D (See DTC U0001:88, U0073, U0073:00 [MULTIPLEX COMMUNICATION SYSTEM] .)
U0100:00 Communication error to PCM C, D (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .)
U0101:00 Communication error to TCM C, D
U0140:00 Communication error to BCM C, D
U0155:00 Communication error to instrument cluster C, D
U0401:00(1) Signal error from PCM C, D (See DTC U0401:00 [DYNAMIC STABILITY CONTROL (DSC)] .)
U0402:00(1) Signal error from PCM (MTX)
Signal error from TCM (ATX)
C, D (See DTC U0402:00 [DYNAMIC STABILITY CONTROL (DSC)] .)
U0422:00(1) Signal error from BCM C, D (See DTC U0422:00/U0428:62/U0428:64 [DYNAMIC STABILITY CONTROL (DSC)] .)
U0428:62(1) Signal error from BCM C, D
U0428:64(1) Signal error from BCM C, D
BCM
(BCM/GEM)
U0001:88(1) Unit communication error C (See DTC U0001:88, U0073, U0073:00 [MULTIPLEX COMMUNICATION SYSTEM] .)
U0100:00 Communication error to PCM C (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .)
U0101:00 Communication error to TCM C
U0121:00 Communication error to DSC HU/CM C
U0151:00 Communication error to SAS control module C
U0401:68(1) Signal error from PCM C (See DTC U0401:68 [BCM] .)
SAS control module
(RCM)
U0073(1) Unit communication error C, D (See DTC U0001:88, U0073, U0073:00 [MULTIPLEX COMMUNICATION SYSTEM] .)
U0155 Communication error to instrument cluster C, D (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .)
Instrument cluster
(IC)
U0001:88(1) Unit communication error C, D (See DTC U0001:88, U0073, U0073:00 [MULTIPLEX COMMUNICATION SYSTEM] .)
U0100:00 Communication error to PCM C, D (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .)
U0101:00 Communication error to TCM C, D
U0121:00 Communication error to DSC HU/CM C, D
U0131:00 Communication error to EHPAS control module C, D
U0140:00 Communication error to BCM C, D
U0151:00 Communication error to SAS control module C, D
U0401:68(1) Signal error from PCM C, D (See DTC U0401:68 [INSTRUMENT CLUSTER] .)
U0401:92(1) Signal error from PCM C, D (See DTC U0401:92 [INSTRUMENT CLUSTER] .)
U0402:68(1) Signal error from TCM C, D (See DTC U0402:68 [INSTRUMENT CLUSTER] .)
U0402:92(1) Signal error from TCM C, D (See DTC U0402:92 [INSTRUMENT CLUSTER] .)
U0415:68(1) Signal error from DSC HU/CM C, D (See DTC U0415:68 [INSTRUMENT CLUSTER] .)
U0415:92(1) Signal error from DSC HU/CM C, D (See DTC U0415:92 [INSTRUMENT CLUSTER] .)
U0452:92(1) Signal error from SAS control module C, D (See DTC U0452:92 [INSTRUMENT CLUSTER] .)
U2005:86(1) Signal error from PCM C, D (See DTC U2005:86 [INSTRUMENT CLUSTER] .)
(1) If only the target DTCs are displayed, perform the corresponding DTC inspection.
(2) ATX
(3) C:CMDTC self-test, D:ODDTC self-test, O:KOEO self-test, R:KOER self-test