| DESCRIPTION |
- U0001:88
- CAN system communication error (HS-CAN)
- U0100:00
- Communication error to PCM
- U0101:00
- Communication error to TCM
- U0121:00
- Communication error to DSC HU/CM
- U0151:00
- Communication error to SAS control module
|
| DETECTION CONDITION |
- U0001:88
- BCM detects the malfunction in the CAN bus communication line (HS-CAN).
- U0100:00
- BCM cannot receive the signal from PCM for 5 s or more
when the ignition is switched to ON.
- U0101:00
- BCM cannot receive the signal from TCM for 5 s or more
when the ignition is switched to ON.
- U0121:00
- BCM cannot receive the signal from DSC HU/CM for 5 s or more
when the ignition is switched to ON.
- U0151:00
- BCM cannot receive the signal from SAS control module for 5 s or more
when the ignition is switched to ON.
|
| FAIL-SAFE FUNCTION |
- U0001:88
- U0100:00
- Inputs the engine speed of 0 rpm
.
- Inputs the vehicle speed of 555.34 km/h {345.07 mph}
.
- U0101:00
- Stops the liftgate latch release operation.
- U0121:00
- U0151:00
- Continues the central door lock control.
|
| POSSIBLE CAUSE |
- Malfunction in CAN bus communication line
- Malfunction in CAN line between BCM and PCM
- Malfunction in CAN line between BCM and TCM
- Malfunction in CAN line between BCM and DSC HU/CM
- Malfunction in CAN line between BCM and SAS control module
|
| SYSTEM WIRING DIAGRAM |
- |