DTC B11DC:11 [BCM]: Notes

DTC B11DC:11	Rear wiper switch circuit malfunction
DETECTION CONDITION	Short to ground in rear wiper switch circuit with the rear wiper switch off.
FAIL-SAFE FUNCTION	Continuously operates the rear wiper.
POSSIBLE CAUSE	Wiper and washer switch connector or terminals malfunction Rear wiper switch malfunction BCM connector or terminals malfunction Short to ground in wiring harness between the following terminals: Wiper and washer switch terminal J-BCM terminal 2L Wiper and washer switch terminal F-BCM terminal 2K BCM malfunction