LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> On-Board Diagnostic [Body Control System) >> Clearing DTC [BCM] >> ODDTC Memory Clearing Procedure

ODDTC Memory Clearing Procedure

  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "BCM/GEM".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition to off.
  6. Switch the ignition to ON and wait for 5 s or more  .
  7. Perform DTC inspection. (See DTC INSPECTION [BCM] .)
  8. Verify that no DTCs are displayed.
scientia non olet · About LEMON Manuals