LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul - (L5) >> Variable Valve Timing Actuator Inspection

Variable Valve Timing Actuator Inspection

CAUTION:
  • Variable valve timing actuator cannot be disassembled because it is a precision unit.
  1. Confirm that the groove of the rotor and notch of the cover at the variable valve timing actuator are aligned and fixed.
    • If the notch and the groove are not aligned, rotate the rotor toward the valve timing retard position by hand until they are in place.
    • If the rotor and cover are not fixed even though their notch and groove are aligned, replace the variable valve timing actuator.
      Fig 1: Inspecting Variable Valve Timing Actuator
      G08575742
scientia non olet · About LEMON Manuals